19
Figure 3. Printer Properties: Security Tab
6. Click the Security tab. See Figure 3.
7. If you are using the PMU for the first time, it is likely that no passwords are
assigned to this printer. If you are unsure, contact your system
administrator.
• If no passwords are assigned, leave the password boxes empty.
• If a User password is necessary to access this printer, type the password
in the User Password field.
• If a Supervisor password is necessary to access this printer, type the
password in the Supervisor Password field, and check the Supervisor
Mode check box.
• If a Telnet guest password is necessary to poll the status of the printer,
type the password in the Telnet Guest Password field. See “Security Tab”
on page 58.
• If a Telnet root password is necessary to update wireless printer settings,
type the password in the Telnet Root Password field. See “Security Tab”
on page 58.
In any case, an asterisk (*) character appears in the field after each letter
you type to preserve password secrecy.
For more details on setting up and changing passwords, see page 51.
To Next Page
Loading...
Need help?
General
