The Status Menu
41
Figure 25. Status Monitoring Properties:
Discovery Tab – Polled Discovery Sub-Tab
2. Polled Discovery: This option allows you to select a range of IP
addresses to poll. To enable the option, click the Polled Discovery tab
and check the Enable Polled Discovery check box, then click Add (see
Figure 25). In the First IP Address field, enter the first IP address of your
desired range. In the Last IP Address field, enter the last IP address. Click
Apply or OK. The PMU polls the printers within your specified range and
displays the results in the database pane.
If Polled Discovery is enabled, a progress indicator displays while the
PMU discovers printers. See Figure 26.
Figure 26. Polled Discovery in Progress
To Next Page
Loading...
