Download The Files
89
Viewing the File Destination
Select a printer in the File Download dialog box and click Properties. The
Update Properties dialog box opens. See Figure 69.
Figure 69. Update Properties
The Update Properties dialog box lists all the files that will be downloaded to
the selected printer, the source of the files, and their destinations:
Printer Flash (a single file to the printer’s flash memory) or Multiple Files to
Printer Flash. Also, if the printer supports the EMC: Expanded Memory
Cartridge (a single file to the EMC), Multiple Files to Expanded Memory
Cartridge, or Both Printer Flash and Expanded Memory Cartridge.
IMPORTANT
The PMU can only download files to the EMC through the Ethernet
Interface.
Changing the File Destination
If you have the optional EMC and you wish to change the destination of a
single file, click Destination. The User Files dialog box opens. See Figure 70.
Select Printer Flash or EMC to specify the new destination.
NOTE: Bundle files (archives that contain multiple files, usually with a .pff
extension) cannot have their destinations changed. Files within
bundle files will download to the printer’s flash memory, the EMC, or
both, depending on their original location.
To Next Page
Loading...
Need help?
General
