f. Align the holes on the microprocessor installation tool with the screws on
the microprocessor bracket, then place the microprocessor installation tool
down over the microprocessor 1. Twist the handle clockwise 2 to attach
the tool to the microprocessor.
g. Twist the handle of the installation tool clockwise to secure the
microprocessor in the tool.
Note: You can pick up or release the microprocessor by twisting the
microprocessor installation tool handle clockwise.
5. Install the microprocessor:
a. Align the holes on the microprocessor installation tool with the screws on
the microprocessor bracket, then place the microprocessor installation tool
down over the microprocessor 1. Twist the handle clockwise 2 to
attach the tool to the microprocessor.
Note: The microprocessor fits only one way on the socket.
b. Twist the handle on the microprocessor tool counterclockwise to insert the
microprocessor into the socket.
Chapter 6. Removing and replacing components 351
To Next Page
Loading...
