Conîš´guration Change events
Table 47. Conîš´guration Change events
Event Code Message Text and Description
8000 The conîš´guration of a drive changed.
8001 The drive was added or removed from the system.
8002 A logical library was added/removed or changed.
8003 I/O station was enabled/disabled.
8004 Drive îš´rmware changed due to îš´rmware upgrade.
8005 Host name/domain name changed.
8006 Email conîš´guration settings changed.
8007 Date/time format changed.
8009 Time zone conîš´guration changed.
8011 Network conîš´guration changed.
8012 Expansion Module upgraded.
8013 NTP time server settings changed.
8014 The SSH Access was enabled/disabled.
8016 Library reset default settings started by user.
8017 Library Firmware changed.
8018 The Unlabeled Cartridge Support conîš´guration changed.
8019 Accessor îš´rmware version upgraded.
8022 Management GUI/Operator Panel Timeout conîš´guration changed.
8024 I/O station/Magazine access control conîš´guration changed.
8026 Accessor change detected.
8029 The SNMP conîš´guration changed.
8030 An SNMP target was added.
8031 An SNMP target was deleted.
8033 The Operator Panel module was changed.
8034 Manual Drive reset executed.
8036 New chassis detected.
8037 Chassis was removed.
8040 LDAP Server was added.
8041 LDAP Server was modiîš´ed.
8042 LDAP Server was deleted.
8043 LDAP User was added.
8044 LDAP User was modiîš´ed.
8045 LDAP User was deleted.
IBM Conîš´dential
Chapter 5. Troubleshooting135
To Next Page
Loading...
Need help?
General
