IBM TS4300

Figure 75. Placement of the RID tag (Base Module shown)
• If a module was added, you must reset your logical libraries by using the basic logical library wizard. See
“Locating Management functions” on page 79 to nd and run the basic logical library wizard.
Adding, removing, or replacing a power supply
CAUTION:
Static Sensitive
Risk of damage to devices
• A discharge of static electricity damages static-sensitive
devices or micro circuitry.
• Proper packaging and grounding techniques are necessary
precautions to prevent damage.
Important: ESD events occurring during power supply installation or removal may cause SAS link reset on
tape drives installed in the library. If this occurs, restart any jobs that were running on affected SAS links.
IBM Condential
160IBM TS4300 Tape Library Machine Type 3555: User's Guide