HBA requirements
The library requires attachment to supported SAS or FC HBAs.
The library requires attachment to supported SAS or FC HBAs. See “Host connectivity” on page 27.
Static Sensitive
Risk of damage to devices
• A discharge of static electricity damages static-sensitive
devices or micro circuitry.
• Proper packaging and grounding techniques are necessary
precautions to prevent damage.
Follow these general guidelines.
• Check with a system administrator before the host computer is powered off.
• For a SAS library, conrm availability or install a SAS HBA that supports multiple LUNs.
• For a direct-attach Fibre Channel library, conrm availability of installation of an FC HBA.
• For connection of a Fibre Channel library through a compatible switch, verify that sufcient ports are
available.
Persistent binding to ensure SCSI ID assignment
When a server is booted, devices are discovered and assigned SCSI target and LUN IDs. It is possible
for these SCSI assignments to change between boots. Some operating systems do not guarantee that
devices are always allocated the same SCSI target ID after rebooting. Also, some software depends on
this association, so you do not want it to change. The issue of SCSI ID assignment is addressed by
persistent binding.
Optional features
Refer to Table 27 on page 45 for features that are available for the tape library. To order extra features,
contact your IBM sales representative or Business Partner.
Table 27. Optional features
Feature Code Description
1411 Fibre wrap tool
1412 SAS wrap tool
1413 Mini SAS-HD tape Drive Support
1682 Path Failover
1899 First Power Supply
1900 Extra Power Supply
7002 Rack Mount Kit
8106 Right Side Magazine
8109 Left Side Magazine
5500 Mini-SAS/Mini-SAS 4x Interposer
Enables attachment of a single tape drive to a host with HD applications (from HD HBA with
SFF-8644 to Drive with SFF-8088 connector).
IBM Condential
Chapter 2. Planning45
To Next Page
Loading...
Need help?
General
