v Power control button and power-on LED:
Press this button to turn the server on and off manually. The states of the
power-on LED are as follows:
Activity LED
(green)
Error LED
(yellow)
Figure 7. Front view of 5U server model with hot-swap power supplies (lower and upper
bezel installed) (Eight 2.5" hard disk drive configuration)
Activity LED
(green)
Error LED
(yellow)
Figure 8. Front view of 5U server model with hot-swap power supplies (lower and upper
bezel installed) (Four 3.5" hard disk drive configuration)
Chapter 1. The IBM System x3100 M5 Type 5457 server 21
To Next Page
Loading...
