Chapter 6
Using LANTEK REPORTER
6-40
Finding Data
The Find function searches for Job Names, Cable IDs and Tests. The Find function
can be found on the Edit menu. It is context sensitive, and is available only when
you have selected an item in the Test grid.
You can control both the type of match and the direction of the search. For
example, if you are searching for a Test, you should have an item on the Test level
of the hierarchy selected before bringing up the Find dialog box.
1. Before opening the Edit menu:
• Click on a folder at the Job level at the left side of the main database
screen to find a job.
• Click on a test in the test grid on the left side of the main database screen
to find a test.
2. Select the Edit menu.
3. Click the Find Test command. The Find dialog box displays.
4. Enter the test name, then specify the find criteria using the Match case and
Direction buttons.
5. Click Find Next.
To Next Page
Loading...
Need help?
General