Chapter 3
Calibration, Configuration, and Special Operations
3-21
Setting Date and Time
Accurate date and time settings are necessary to create reliable record and report
information.
1. From the Preferences screen,
select Date and Time.
Press Enter. The Date and
Time screen appears.
2. Select or to
select the desired time format
setting.
3. Use the Arrow keys to highlight the parameter to be changed.
4. Press or select the Alphanumeric or soft keys to enter the desired setting.
5. Repeat steps 2 and 3 until all of the desired parameters have been set.
6. Press
to save or
to exit without saving changes.
To Next Page
Loading...
Need help?
General