EasyManua.ls Logo

iDirect X1 - X1 Outdoor Router Installation Procedures

iDirect X1
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation, Support, and Maintenance Guide 33
Evolution X1 Satellite Router
6 X1 Outdoor Router
Installation
This chapter describes the guidelines and procedures for installing the X1 Outdoor Router.
This chapter contains the following sections:
Section 6.1, X1 Outdoor Router Installation at a Glance on page 34
Section 6.2, Unpacking X1 Outdoor Router Equipment on page 35
Section 6.3, Components Typically Included in an Order on page 35
Section 6.4, Installation with AC (Option 1) or DC (Options 2 and 3) Power Supplies on
page 36
Section 6.5, X1 Outdoor Router Mounting on page 37
Section 6.6, External Power Module Mounting Instructions on page 40
Section 6.7, Connecting the Ethernet LAN Cable on page 42
Section 6.8, Preparing and Connecting the Coax RX and TX cables on page 44
Section 6.9, Connecting the DC Power Module on page 45
Section 6.10, Powering Up the System on page 48
Section 6.11, Preparing the PC/Laptop for Connection to the X1 Outdoor Router on
page 50
Section 6.12, Front Panel Power Indicator and Web Interface LED Status Indicators on
page 50
Section 6.13, Configuring the X1 Outdoor Router on page 51
NOTE: Thoroughly review all the information in Chapter 2, Safety on page 3
before attempting the procedures in this chapter.

Table of Contents

Related product manuals