IEI Technology AFL-HM55 Series User Manual

AFL-HM55 Series Panel PC
Page 52
4.1 System Maintenance Introduction
If the components of the AFL-HM55 Series fail they must be replaced. Components that
can be replaced include:
 SO-DIMM module
 SATA DOM module
 HDD drive
Please contact the system reseller or vendor to purchase replacement parts.
4.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL-HM55 Series may result in permanent damage to the AFL-HM55
Series and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL-HM55 Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the panel PC is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: - When configuring the AFL-HM55 Series, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
AFL-HM55 Series.
 Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.

IEI Technology AFL-HM55 Series Specifications

General

Brand	IEI Technology
Model	AFL-HM55 Series
Category	Touch Panel
Language	English