IEI Technology AFL-HM55 Series User Manual

AFL-HM55 Series Panel PC
Page 71
5.3.6.1.4 Parallel Port Configuration
 Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.

Disabled
Disable the parallel port

Enabled DEFAULT
Enable the parallel port
 Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.

Auto DEFAULT
The parallel port IO port address and interrupt
address are automatically detected.

IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7

IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7

IO=3BCh;
IRQ=7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ7

IO=378h
Parallel Port I/O port address is 378h

IO=278h
Parallel Port I/O port address is 278h

IO=3BCh
Parallel Port I/O port address is 3BCh
 Device Mode [Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
 Standard and Bi-direction (SPP) mode Default
 EPP-1.9 and SPP Mode
 ECP Mode
 ECP and EPP 1.9 Mode

IEI Technology AFL-HM55 Series Specifications

General

Brand	IEI Technology
Model	AFL-HM55 Series
Category	Touch Panel
Language	English