SD1 Series Inverters Function Parameters
-61-
Name Description Default Modify
The direction control is as follows during
operation:
Sln REV
ON OFF→ON
ON ON→OFF
ON→
Decelerate to stop
3: 3-wire control 2; Sin is the enabling terminal in
this mode, and the running command is caused
by SB1 or SB3 and both
direction. NC SB2 generates the stop command.
ON OFF→ON
ON
OFF→ON
ON→
Decelerate
Note: For the 2-wire running mode, when
To Next Page
Loading...
