IMO SD1 Series - Page 77

SD1 Series Inverters Function Parameters
-72-
Function
code
Name Description Default Modify
P07.15
High bit of
power
consumption
Display the power used by the inverter.
The power consumption of the inverter
=P07.15×1000+P07.16
Setting range of P07.15: 0~65535kWh (*1000)
Setting range of P07.16: 0.0~999.9kWh
●
P07.16
Low bit of
power
consumption
●
P07.18
R
ated power of
the inverter
0.4~3000.0kW
●
P07.19
Rated voltage
of the inverter
50~1200V
●
P07.20
Rated current
of the inverter
0.1~6000.0A
●
P07.21
Factory bar
code 1
0x0000~0xFFFF
●
P07.22
Factory bar
code 2
0x0000~0xFFFF
●
P07.23
Factory bar
code 3
0x0000~0xFFFF
●
P07.24
Factory bar
code 4
0x0000~0xFFFF
●
P07.25
Factory bar
code 5
0x0000~0xFFFF
●
P07.26
Factory bar
code 6
0x0000~0xFFFF
●
P07.27
Type of
present fault
0: No fault
1: OUt1
2: OUt2
3: OUt3
4: OC1
5: OC2
6: OC3
7: OV1
8: OV2
9: OV3
10: UV
11: Motor overload (OL1)
12: Inverter overload (OL2)
13: Input side phase loss (SPI)
14: Output side phase loss (SPO)
●
P07.28
Type of the last
fault
●
P07.29
Type of the last
but one fault
●
P07.30
Type of the last
but two fault
●
P07.31
Type of the last
but three fault
●
P07.32
Type of the last
but four fault
●