10
Checking the software version is usually done in the enter setup mode, so it is
necessary to scan “Exit without Save” barcode after the software version outputs.
Save Custom Settings
1. You may change factory defaults and customize some functions suitable for your
own applications when using the inateck BCST-33. You need to scan ‘Enter Setup’
→ ‘Function setup barcode you want to customize(e.g.: Output Code ID)’ → ‘Save
Custom Settings’ barcodes in turn to set the function well.
2. If you want to restore to custom settings after resetting the barcode scanner, just
read ‘Enter Setup’ → ‘Restore Custom Settings’ barcode in turn, and the custom
settings will be restored.
Exit without Save
Enter Setup
Enter Setting Mode
Save Custom Settings
To Next Page
Loading...
