Inateck BCST-33 - 3.13. Matrix 2 of 5; 3.13.1. Enable or Disable Matrix 25; 3.13.2. Checksum Verification

47
3.12. Interleaved 2 of 5
3.12.1. Enable / Disable Interleaved 25
Decide whether to enable Interleaved 25 by scanning correspondent barcode below.
Inateck BCST-33 defaults to “Enable Interleaved 25”.
Operations are as below if you want to enable Interleaved 25:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Interleaved 25." barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
(*)Enable Interleaved 25
Exit with Save
Disable Interleaved 25
Exit without Save