Inateck BCST-33 - 3.6. EAN-8; 3.6.1. Enable;Disable EAN-8; 3.6.2. Checksum Verification

36
3.6. EAN-8
3.6.1. Enable/Disable EAN-8
Decide whether to read EAN-8 by scanning correspondent barcode below. Inateck
BCST-33 defaults “Enable EAN-8”.
3.6.2. Checksum Verication
Decide whether to transmit EAN-8 Checksum via selecting correspondent barcode
below to scan. Inateck BCST-33 defaults “Transmit EAN-8 Checksum”.
Operations are as below if you want to enable EAN-8 and transmit EAN-8 Checksum:
1. Read the "Enter Setup" barcode;
2. Read the "Enable EAN-8" barcode;
3. Read the "Transmit EAN-8 Checksum" barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
(*)Enable EAN-8
(*)Transmit EAN-8 Checksum
Exit with Save
Disable EAN-8
Do Not Transmit EAN-8 Checksum
Exit without Save