Inateck BCST-33 - 3.7. EAN-13; 3.7.1. Enable; Disable EAN-13; 3.7.2. Checksum Verification

37
3.7. EAN-13
3.7.1. Enable / Disable EAN-13
Decide whether to read EAN-13 via selecting correspondent barcode below to scan.
Inateck BCST-33 defaults enable EAN-13.
3.7.2. Checksum Verication
Decide whether to Transmit EAN-13 Checksum via selecting correspondent barcode
below to scan. Inateck BCST-33 defaults transmit EAN-13 Checksum.
Operations are as below if you want to Enable EAN-13 and transmit EAN-13
Checksum:
1. Read the "Enter Setup" barcode;
2. Read the "Enable EAN-13" barcode;
3. Read the "Transmit EAN-13 Checksum" barcode;
4. Read the "Exit with Save" barcode.
(*)Enable EAN-13
(*)Transmit EAN-13 Checksum
Disable EAN-13
Do Not Transmit EAN-13 Checksum
Enter Setup
Exit with Save
Exit without Save