Inateck BCST-33 - 3.1.1. Enable; Disable Codabar

24
Chapter 3 Symbology Settings
3.1. Codabar
3.1.1. Enable / Disable Codabar
Decide whether to enable Codabar through selecting correspondent barcode below.
The Inateck BCST-33 Scanner defaults enable Codabar contents.
Note: Scanning the "Disable Codabar" barcode will result in the scanner being unable
to read the Codabar barcode. Thus, if the scanner cannot read the Codabar barcode,
please try to scan "Enable Codabar" to reset.
For example: Steps to enable Codabar are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Codabar" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
(*)Enable Codabar
Exit with Save
Disable Codabar
Exit without Save