Inateck BCST-33 - 4.5. Letter Case Setting

58
4.5. Letter Case Setting
Inateck BCST-33 can change all the letter cases of barcode into uppercase or
lowercase. Though it takes “Not to Alter the Letter Case of barcodes” as default, letter
case of barcodes can be altered through scanning correspondent bar code below.
Steps to alter letter case of barcodes into uppercase are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Alter to Uppercase" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Alter to Uppercase
Exit with Save
Alter to Lowercase
Exit without Save
(*)Not to Alter Letter Case