Inateck BCST-33 - 1.4.4. Hands-free Mode

17
1.4.3. Manual Mode
Under this Manual Mode, the Inateck BCST-33 Scanner will emit a red light line which
indicates the scanner could scan if the user keeps pressing the Trigger. And the
scanning will not stop until the scanner under the following situation.
* Read a barcode successfully;
* Release the Trigger;
Manual Mode
For Example, If you want to set the scanner into manual mode, you may need to:
1. Read the "Enter Setup" barcode;
2. Read the "Manual Mode" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save