Inateck BCST-33 - Chapter 2 How to Connect with Computer;phone;POS; 2.1. USB Wired Data Transmission; 2.2. Transmission Speed

22
Chapter 2 How to Connect with Computer/phone/
POS
2.1. USB Wired Data Transmission
Following the USB-HID agreement, the Inateck BCST-33 supports timely data
transmission through USB cable connection. Data connection through USB is
preferred when it's connected via USB cable.
2.2. Transmission Speed
The scanner works in high speed transmission mode by default with default data
transmission interval at 0 ms. If you want to use the scanner with some low-speed
software (like Excel on Android devices), please adjust the transmission interval of the
scanner to avoid data loss.
(*)0ms
16ms
64ms
128ms
32ms
96ms
How to set 16ms as interval for data transmission
1. Scan “Enter setup”;
2. Scan “16ms”
3. Scan “Save and Exit”.