Inateck BCST-33 - 4.9. Caps Lock Control

63
4.9. Caps Lock Control
When you operate Inateck BCST-33 on a Windows system, the barcode output might
change
with the status of the key Caps Lock. To avoid mistakes caused this way, you can
activate the “Rid Barcode of Caps Lock control”.
How to activate ”Rid Barcode of Caps Lock Control ”
1. Scan “Enter Setup”;
2. Scan “Rid Barcode of Caps Lock Control”
3. Scan “Save and Exit”.
Enter Setup
Exit with Save
Exit without Save
(*) Caps Lock Control
Rid Barcode of Caps Lock Control