Inateck BCST-33 - 3.2. Code 11; 3.2.1. Enable;Disable Code 11

26
3.2. Code 11
3.2.1. Enable/Disable Code 11
Decide whether to include Enable/Disable code 11 in the data being transmitted by
scanning relevant barcodes below, with disable Code 11 as default.
Note: Read the "Disable Code 11" barcode will make the scanner not being able to
read the Code 11 barcode. Thus, if the scanner cannot read the Code 11 barcode,
please try to scan "Enable Code 11" to reset.
For example: Enable Code 11.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 11" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Enable Code 11
Exit with Save
(*)Disable Code 11
Exit without Save