59
4.6. Additional Code
The occurrence of additional code can be found in several types of barcode like EAN-
8, EAN-13, ISBN, ISSN, UPC-A and UPC-E. Being 2 or 5 characters, additional code is
usually on the right side of the main code but with shorter height. Inateck BCST-33
will only be able to read the main code if additional code is disabled.
4.6.1. Two digits Additional Code
Decide whether to read two digits additional code, which applies to EAN-8, EAN-13,
ISBN, ISSN, UPC-A and UPC-E, by scanning correspondent barcode below. Inateck
BCST-33 defaults to “Disable Two Digits Additional Code”.
4.6.2. Five digits Additional Code
Decide whether to read ve digits additional code, which applies to EAN-8, EAN-13,
ISBN, ISSN, UPC-A and UPC-E, by scanning correspondent barcode below. Inateck
BCST-33 defaults to “Disable Five Digits Additional Code”.
Enable Two Digits Additional Code
Enable Five Digits Additional Code
(*) Disable Two Digits Additional Code
(*)Disable Five Digits Additional Code
To Next Page
Loading...
