Inateck BCST-33 - 3.11. IATA 2 of 5; 3.11.1. Enable; Disable IATA 25; 3.11.2. Checksum Verification

45
3.10.4. Convert UPC-E to UPC-A
Decide whether to convert the UPC-E to UPC-A by scanning correspondent barcode
below. Inateck BCST-33 defaults “Convert UPC-E to UPC-A”.
3.10.5. Checksum Verication
Decide whether to transmit UPC-E Checksum by scanning correspondent barcode
below. Inateck BCST-33 defaults “Transmit UPC-E Checksum”.
Convert UPC-E to UPC-A
(*)Transmit UPC-E Checksum
(*) Do Not Convert UPC-E to UPC-A
Do Not Transmit UPC-E Checksum