Inateck BCST-33 - 3.4.6. Code 32

34
3.4.6. Code 32
Code 32, usually applied to Italian medical products, is a special form of Code 39.
Inateck BCST-33 defaults “Disable Code 32”.
The rst character of Code 32 is xed to be “A”. Decide whether to output the rst
character of Code 32 via selecting correspondent barcode to scan. Inateck BCST-33
defaults “Disable rst character of Code 32”.
Operations are as below if you want to enable rst character of Code 32:
1. Read the "Enter Setup" barcode;
2. Read the "Enable rst character of Code 32" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Enable Code 32
Enable First Character of Code 32
Exit with Save
(*)Disable Code 32
(*)Disable First Character of Code 32
Exit without Save