Inateck BCST-33 - 3.9. UPC-A; 3.9.1. Enable; Disable UPC-A; 3.9.2. UPC-A output 0; 3.9.3. Checksum Verification

42
Operations are as below if you want to verify with one digit checksum character and
do not transmit checksum character:
1. Read the "Enter Setup" barcode;
2. Read the "Verify with one digit Checksum Character" barcode;
3. Read the "Verify without Output Checksum Character" barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save