Inficon Ecotec E3000 User Manual

INFICON Description | 4
Ecotec E3000-Operating-instructions-kina22en1-28-(2211) 15 / 104
4.3 Sniffer line
You need a sniffer line to operate the device.
Sniffer lines are available in four lengths: 3m, 5m, 10m and 15m. The sniffer line
consists of a hose (multifunction cable), a handle with controls (sniffer handle) and a
sniffer tip.
There is a special sniffer line for robot applications, see "Accessories [}85]."
Sniffer tip There are rigid and flexible sniffer tips with different lengths.
Sniffer handle
Display and functions
The display on the sniffer handle shows current information on the measuring process.
You can operate functions frequently used during measurement with both buttons.
LEDs inserted in the handle illuminate the test area.
1
2
3
4
5
Fig.4: Sniffer handle Display and functions
1 Display 4 I•Guide operation
2 LEDs 5 ZERO alignment
3 Speaker (rear)
If the measuring value limit is exceeded, the display switches from green to red. You
can additionally set one speaker in the handle to output a signal and the LEDs in the
handle to flash or shine with maximum brightness, see "Basic settings [}32]."

Inficon Ecotec E3000 Specifications

General

Brand	Inficon
Model	Ecotec E3000
Category	Security Sensors
Language	English