Inficon Ecotec E3000 User Manual

INFICON Operation | 6
Ecotec E3000-Operating-instructions-kina22en1-28-(2211) 61 / 104
Menu item Format Description
SW version BL
Serial number
BM1000 Bus type
SW version Module
Serial number Module
Address act. Value
Page 11: Info field bus BM 1000
Baud rate
Exception code
Error counters
State
Station name
IP address
IP subnet mask
Gateway IP address
DHCP enabled
Table6: Device information
6.8 Special features of individual gases
R134a: Influencing by
cyclopentane and
R245fa
If you are sniffing for R134a, the presence of cyclopentane and R245fa can lead to
incorrect measurement results. Search for R134a with alternative mass position 83, if
cyclopentane and R245fa could be sniffed. Setting a different mass, see "Setting
Custom Gas [}49]."
R600a: Influencing by
cyclopentane and
isopentane
If you are sniffing for R600a, the presence of cyclopentane and isopentane can lead to
incorrect measurement results. Search for R600a with the IGS mass position, if
cyclopentane and isopentane could be sniffed. Setting the IGS mass position, see
"Suppress interfering gases [}48]."
Special features with
helium
If you are sniffing for helium, the Ecotec E3000 needs longer for an analysis than with
refrigerants. Therefore stick to the following times during which you will not move the
sniffer tip.
Length of sniffer line Minimum measurement time
3m 2.2s
5m 2.5s
10m 3.3s
15m 4.5s
Table7: Minimum measurement times for helium

Inficon Ecotec E3000 Specifications

General

Brand	Inficon
Model	Ecotec E3000
Category	Security Sensors
Language	English