INFICON Installation | 5
Ecotec E3000-Operating-instructions-kina22en1-28-(2211) 25 / 104
5.6.1 Connecting to a PC
The connection is made with a commercially available 9-pin Sub-D plug. Please refer
to the “Interface description Ecotec E3000” (doc. no. kins22e1) for further information
on data exchange.
5.6.2 Connecting with a PLC
The connection is made with a commercially available 25-pin Sub-D plug. Please refer
to the “Interface description Ecotec E3000” (doc. no. kins22e1) for further information
on data exchange.