Inficon Ecotec E3000 - Decommissioning; Disposing of the Device; Returning the Device for Maintenance, Repair or Disposal

INFICON Decommissioning | 9
Ecotec E3000-Operating-instructions-kina22en1-28-(2211) 83 / 104
9 Decommissioning
9.1 Disposing of the device
The owner can dispose of the device or it can be sent to INFICON.
The device consists of materials that can be recycled. This option should be exercised
to prevent waste and also to protect the environment.
► During disposal, observe the environmental and safety regulations of your country.
9.2 Returning the device for maintenance, repair or
disposal
WARNING
Danger due to harmful substances
Contaminated devices could endanger health. The contamination declaration serves
to protect all persons who come into contact with the device. Devices sent in without a
return number and completed contamination declaration will be returned to the sender
by the manufacturer.
► Fill in the declaration of contamination completely.
1 Contact the manufacturer and send in a completed declaration of contamination
before return shipment.
ð You will then receive a return number and the shipping address.
2 Use the original packaging when returning.
3 Before shipping the instrument, attach a copy of the completed contamination
declaration to the outside of the package.