INFICON Operation | 6
Ecotec E3000-Operating-instructions-kina22en1-28-(2211) 63 / 104
6.9 Switch off
NOTICE
Property damage from rotating parts
The turbo molecular pump requires 5minutes to power down.
► Allow the turbo molecular pump to power down before any maintenance work is
performed or before moving the device.
You can switch off the Ecotec E3000 at any time with the power switch (position “0”). It
takes a few minutes for the turbo molecular pump to come to a standstill. The Ecotec
E3000 must not be moved during that time.
The parameter set in the Ecotec E3000 are saved. After the start-up, the Ecotec
E3000 returns to the same state that it was in before it was switched off.
To Next Page
Loading...
