Inficon Ecotec E3000 User Manual

10 | Appendix INFICON
86 / 104 Ecotec E3000-Operating-instructions-kina22en1-28-(2211)
Accessory part Order no.
HFO-1234yf 122 35
SF6 123 00
R245fa 123 04
R452A 123 05
R441A 123 06
Xe 123 14
R1234zf 123 15
Calibrated leak 100% hydrogen
Leak rate 1.00E-4 mbarl/s for calibration
setting with 100% hydrogen; leak rate
2.01E-3mbarl/s for calibration setting
with 95/5 forming gas
123 22
Calibrated leak for R290, leak rate 7–8 g/
a
122 31
Calibrated leak for helium
S-TL 4, leak rate range 10
-4
mbarl/s 122 37
S-TL 5, leak rate range 10
-5
mbarl/s 122 38
S-TL 6, leak rate range 10
-6
mbarl/s 122 39
Calibrated leak for methane, TL4-6 122 49
Calibrated leaks for other refrigerants on request
External display unit for Ecotec E3000RC
for use as table device 551-100
for rack mounting 551-101
Connecting cable for external display unit
for Ecotec E3000RC, 5 m 551-102
for Ecotec E3000RC, 1 m 551-103
Module
IC1000 525-200
Data cable, 0.5m IC1000 <-> BM1000 560-334
Bus module
BM1000 PROFIBUS 560-315
BM1000 PROFINET IO 560-316
BM1000 DeviceNet 560-317
BM1000 EtherNet/IP 560-318

Inficon Ecotec E3000 Specifications

General

Brand	Inficon
Model	Ecotec E3000
Category	Security Sensors
Language	English