Ingenico Move 3500 - Configuration Steps and Security

Page 24
Move/3500 User Guide
Copyright© 2017 Ingenico
The terminal will
power cycle.
The terminal may
then contact any/all
of the acquirers to
for verification.
Type in your
preferred
‘Supervisor
Code’ and then
press
The ‘Logo’ and
text ‘AUTH
HOST’ will differ
for each Acquirer
Type in your
preferred
‘Supervisor
Code’ and then
press .
The terminal will
contact the
configuration
host.
Re-type your
new ‘Supervisor
Code’ and then
press .
The terminal will upload the
status of its applications and print
a list of card types that will be
accepted.
Press to
acknowledge the
change.
Terminal will
return to the ‘Idle
Screen’ if
installation is
successful.