Ingenico Move 3500 User Manual

Page 28
Move/3500 User Guide
Copyright© 2017 Ingenico
Sale – Swiped Card
Press at the ‘Idle
Screen’ to display the
‘Transaction Menu’ and
highlight ‘Sale’ as
described earlier and
press .
The terminal will
connect to the acquirer
using the configured
connection method e.g.
‘Mobile Network’.
This screen will be
displayed if ‘Sale’ is
selected from the above
menu. As you type in
the transaction amount,
it will change to:
A response to the ‘Sale’
request is returned by
the acquirer.
The terminal will print
the merchant receipt.
Press to confirm
amount or press to
clear all digits or press
to clear one digit at
a time and type in new
value.
Tear off the merchant
receipt and press
if it
is readable or press
to reprint the receipt.
Ask the cardholder to
sign the receipt.
The available options
displayed are
dependent on the
transaction value typed
in.
Present/Insert/Swipe
If the signature is a
match
to the one on the
card press .
The terminal will print
the customer receipt.
Terminal will check the
card
Tear off the customer
receipt and press
if it
is readable or press
to reprint the receipt.

Ingenico Move 3500 Specifications

General

Battery	Li-ion 2200mAh
Security	PCI PTS 5.x certified
Processor	ARM Cortex A5
Connectivity	Wi-Fi, Bluetooth, 3G
Operating System	Telium TETRA
Card Readers	EMV chip, NFC, magnetic stripe
Weight	320g
Display	2.4-inch QVGA (240x320 pixels)