Ingenico Move 3500 User Manual

Page 36
Move/3500 User Guide
Copyright© 2017 Ingenico
Remove the customer’s
card from the terminal.
Terminal will print the
customer’s receipt.
If prompted to check
signature press
if OK
or press if not OK.
Press to cancel the
transaction.
Tear off the cardholder
receipt and press
if it
is readable or press
to reprint the receipt.
Terminal returns to the
‘Idle Screen’.
Note: If the card used for the refund does NOT require signature verification the
cardholder receipt will be printed before the merchant receipt.

Ingenico Move 3500 Specifications

General

Battery	Li-ion 2200mAh
Security	PCI PTS 5.x certified
Processor	ARM Cortex A5
Connectivity	Wi-Fi, Bluetooth, 3G
Operating System	Telium TETRA
Card Readers	EMV chip, NFC, magnetic stripe
Weight	320g
Display	2.4-inch QVGA (240x320 pixels)