Ingenico Move 3500 - X-Totals; Z-Totals

Page 57
Move/3500 User Guide
Copyright© 2017 Ingenico
X-Totals / Z-Totals
X-Totals are sometimes referred to as an End of Shift Balance report. This is
because it allows you to print a total of all transactions performed since the last
Z-Totals report. X-Totals do not reset the totals within the terminal.
Z-Totals show the total of all transactions processed through the terminal for
each card company since the last Z-Totals were performed. Once Z-Totals
have been completed the totals within the terminal are reset to zero once
terminal returns to the ‘Ready Screen’. Z-Totals are not connected to your
Banking totals.
X –Z Totals Report
Merchant ID
Terminal ID
Report for receipt numbers 0001 - 0026
Number and value of debit transactions (sales)
Number and value of credit transactions (Refunds)
Card Scheme Name
Card Scheme Name
Number and value of debit transactions (sales)
Number and value of credit transactions (Refunds)
Totals recorded on the acquirer host (for comparison)
Indication if totals were reset or not
Date and Time of Report
X - TOTALS
<Merchant Name>
<Merchant Address1>
<Merchant Address2>
Merchant No. 6815414
Terminal ID. 32870069
------------------------
<Acquirer Name>
FOR RECEIPTS 0001-0026
10 359.90DR
1 10.00CR
TOTAL 11 349.90DR
MASTERCARD
2 109.88DR
0.00CR
TOTAL 1 109.88DR
VISA
8 250.02DR
1 10.00CR
TOTAL 9 240.02DR
-------------------------
GRAND TOTAL
10 359.90DR
1 10.00CR
TOTAL 11 349.90DR
-------------------------
TOTALS NOT RESET
08:32 03/04/17