Ingenico Move 3500 - Function 34 System Security

Page 64
Move/3500 User Guide
Copyright© 2017 Ingenico
Function 34 System Security
If you know your ‘Supervisor Code’ but wish to change it; press until the
‘System Menu’ is displayed and enter the Function Code 34 as described in
‘Selecting Function Codes’ above. The following screens will be displayed:
Press to change
‘Supervisor Code’
or press to
return to the ‘Idle
Screen’.
Re-enter new code
and then press
to submit code.
Use or to
correct mistakes.
Enter current
code and then
press to
confirm.
Use or to
correct mistakes.
Press to
confirm code
change.
Enter new code
and then press
to submit code.
Use or to
correct mistakes.