Ingenico Move 3500 User Manual

Page 29
Move/3500 User Guide
Copyright© 2017 Ingenico
Sale – Inserted Card
Press at the ‘Idle
Screen’ to display the
‘Transaction Menu’ and
highlight ‘Sale’ as
described earlier and
press .
Customer to enter their
PIN code and press
to confirm the PIN.
This screen will be
displayed if ‘Sale’ is
selected from the above
menu. As you type in
the transaction amount,
it will change to:
Terminal connects to
the acquirer using
mobile network
Press to confirm
amount or press to
clear all digits or press
to clear one digit at
a time and type in new
value.
A response to the ‘Sale’
request is returned by
the acquirer.
The terminal will print
the cardholder receipt.
Insert the cardholder’s
card as described
previously.
Tear off the cardholder
receipt and press
if it
is readable or press
to reprint the receipt.
The terminal will print
the merchant receipt.
Terminal will check the
card
Tear off the merchant
receipt and press
if it
is readable or press
to reprint the receipt.

Ingenico Move 3500 Specifications

General

Battery	Li-ion 2200mAh
Security	PCI PTS 5.x certified
Processor	ARM Cortex A5
Connectivity	Wi-Fi, Bluetooth, 3G
Operating System	Telium TETRA
Card Readers	EMV chip, NFC, magnetic stripe
Weight	320g
Display	2.4-inch QVGA (240x320 pixels)