Ingenico Move 3500 User Manual

Page 30
Move/3500 User Guide
Copyright© 2017 Ingenico
Sale – Contactless
Press at the ‘Idle
Screen’ to display the
‘Transaction Menu’ and
highlight ‘Sale’ as
described earlier and
press .
This screen will only be
displayed if the terminal
attempted to
connect to
the acquirer.
This screen will be
displayed if ‘Sale’ is
selected from the above
menu. As you type in
the transaction amount,
it will change to:
This screen will only be
displayed if the t
erminal
went online for
approval.
Press to confirm
amount or press to
clear all digits or press
to clear one digit at
a time and type in new
value.
Terminal will
display the
result of the request i.e.
‘Approved’ or ‘Not
Authorised’.
Present the contactless
card to the terminal as
described previously.
Terminal will print the
merchant receipt.
Contactless read is
successful when all four
status lights are lit and
confirmation tone is
heard.
Tear off the receipt and
press
if it is readable
or press to reprint
the receipt.
Press if a
cardholder receipt is
required.

Ingenico Move 3500 Specifications

General

Battery	Li-ion 2200mAh
Security	PCI PTS 5.x certified
Processor	ARM Cortex A5
Connectivity	Wi-Fi, Bluetooth, 3G
Operating System	Telium TETRA
Card Readers	EMV chip, NFC, magnetic stripe
Weight	320g
Display	2.4-inch QVGA (240x320 pixels)