Safety Information
-
6
-
During Running
◆
It is prohibited to touch any terminal of the equipment when it is running; otherwise, there is the danger
of electric shock!
◆
It is prohibited to dismantle any device or parts of the equipment and product when the equipment is
running; otherwise, there is the danger of electric shock!
◆
It is prohibited to touch the equipment closure, fan or resistor to check the temperature; otherwise, there
is the danger of burn!
◆
Non-professional technicians are prohibited to detect the signal when the equipment is running; other-
wise, there is the danger of personal injury or damage to the equipment!
Warning
◆
When the equipment is running, do not drop other articles or metals into the equipment; otherwise, the
equipment may be damaged!
◆
Do not start or stop the equipment by turning on or off the connector; otherwise, the equipment may be
damaged!
During Maintenance
◆
Non-professionals are strictly prohibited from equipment installation, wiring, maintenance, inspection or
parts replacement!
◆
It is prohibited to maintain the equipment when power is on; otherwise, there is the danger of electric
shock!
◆
After the equipment power is cut off, wait for at least 10 minutes before maintaining the equipment or
performing other operations.
◆
Follow the equipment maintenance and repair requirements for routine and regular inspection and main-
tenance of the product and equipment, and prepare the maintenance records.
During Repair
◆
Non-professionals are strictly prohibited from equipment installation, wiring, maintenance, inspection or
parts replacement!
◆
It is prohibited to repair the equipment when power is on; otherwise, there is the danger of electric
shock!
◆
After the equipment power is cut off, wait for at least 10 minutes before inspecting or repairing the equip-
ment or performing other operations.
To Next Page
Loading...
