Chapter 16: User management
TruVision DVR 12HD User Manual 111
To add new users:
1. From the menu toolbar, click User Management.
2. Click Add to enter the Add User window.
3. Enter the new user’s name and password. Both the user name and password can
have up to 16 alphanumeric characters.
4. Select the new user’s access level: Operator or Guest. Default is Guest.
5. Enter the user’s MAC address to let the user access the recorder from a remote
computer with this MAC address.
6. Click OK to save the settings and return to the previous window.
7. Define the user’s permissions.
Click the Permission button for the new user. In the Permissions pop-up
window check the required access privileges for local, remote and camera
configuration. See “Customizing a user’s access privileges” below for the permission
descriptions for each group.
Click Apply to save the settings and OK to return to the previous window.
8. Click Exit to return to live view.
Customize a user’s access privileges
Only an administrator can allocate access privileges to Operator and Guest users. The
access privileges can be customized for each user’s needs. The administrator’s access
privileges cannot be changed.
There are three types of privilege settings: Local Configuration, Remote Configuration,
and Camera Configuration.
Note: Only the administrator can restore factory default settings.
Local configuration settings
By default, only the local information (log) management setting is enabled for both
operators and guests.
• Local Information (Log) Management: Search and view logs of the recorder and
view system information.
• Local Parameter Settings: Configure parameters and import the configuration from
the recorder.
• Local Camera Management: Locally add, delete, and edit IP cameras.
To Next Page
Loading...
Need help?
General
