Chapter 10: Camera setup
TruVision DVR 12HD User Manual 71
Note: It is important to ensure that the settings correspond with those used in the
PTZ camera.
3. Click Copy to copy the settings to another camera, if required, and select the
cameras.
4. Click Apply to save the settings and then click Exit to return to live view.
PTZ presets and tours
Presets are previously defined locations of an analog PTZ dome camera. It allows you
to quickly move the PTZ dome camera to a desired position. They are configured and
modified from the Camera Setup > PTZ Presets/Tours window (see Figure 22 below).
Tours are series of presets. Shadow tours allow you to record the manual movement of
a PTZ and follow the same tour at a later date.
Note: The PTZ dome camera used must be able to support a preset command. See
Appendix G “Supported PTZ commands” on page 152 for the complete list of PTZ
commands available by camera protocol.
Figure 22: PTZ configuration window
Table 13: Description of the PTZ configuration window
To Next Page
Loading...
Need help?
General
