Chapter 7: Searching files
TruVision DVR 12HD User Manual 49
To search for motion:
1. In the “Time & Date” search menu, select the desired camera (1 camera), record
type, file type as well as start and end times of the recording. Only one camera can
be selected.
2. Click Motion Search. The motion search view opens.
3. In the motion search view, mark the area in which the recorder needs to search for
motion. Use the motion search toolbar to select full screen, remove full screen
selection, start motion search and exit motion search.
4. Click to retrieve the motion events.
The standard playback view opens, containing all recordings for the period of time
selected. Motion events are shown in blue in the time bar. Click on the time bar to
skip from one motion event to the next.
Search and playback recordings by event
You can search recorded video by event type: motion, text insertion, intelligent alarms,
and alarm input.
To play back search results:
1. In live view right-click the mouse on the desired video pane and select Search
Video. The Search menu appears.
2. In the Search menu, click the “Event” tab.
3. Select the desired event type as well as start and end times of the recording.
4. Select the desired alarm inputs or channels.
If you selected “Intelligent Alarm” as the event type, select the required IP cameras.
5. Click Search. The list of search results appears.
6. Select the desired video from the list.
7. In the search results window, you can:
- Click Play to playback the footage
- Click Archive to archive results
- Click Details to display more information about an event.
Note: You can modify the pre- and post-play periods of a recording.
Search bookmarked recordings
For information on creating bookmarks, see “Create bookmarks” on page 45.
To Next Page
Loading...
Need help?
General
