Chapter 7: Searching files
TruVision DVR 12HD User Manual 47
Search all video by time and date of recording.
Search only event recorded files. Files can be searched by alarm inputs,
motion detection, text insertion, or intelligent alarms.
Search recorded files with bookmarks.
The recorder can run a disk analysis to get a broader sense of the video data
stored on the HDD. This video data can include alarms, events, video Loss,
and more. Recorded video cannot be retrieved from this window.
Search results
A search will usually produce a list of files, which may extend to several pages. The
files are listed by date and time. The most recent file is listed first. You can then select a
file to play it back. See Figure 15 on page 47 for an example of a search.
Only one file can be played back at a time.
Figure 15: Example of a search result list
1. Click to playback the selected video.
2. Click to lock recording to prevent it from being
overwritten.
Search for motion events in playback
1. In playback mode, click the ‘Smart’ icon . The motion search view opens.
2. In the motion search view, mark the area in which the recorder needs to search for
motion. Use the motion search toolbar to select full screen (1), remove full screen
selection (2), start motion search (3) and exit motion search (4).
To Next Page
Loading...
Need help?
General
