V-stream Encoding Define the v-stream parameters. See “V-stream encoding”
on page 74 for more information.
Network Settings Network Settings Define the general network settings. See “Network settings”
on page 76 for more information.
PPPoE Define the PPPoE settings. See “PPPoE settings” on page
78 for more information.
DDNS Define the DDNS settings. See “DDNS settings” on page 79
for more information.
NTC Define the NTC server settings. See ““NTP server settings”
on page 80 for more information.
Email Define the settings to send an e-mail. See “E-mail settings”
on page 81 for more information.
FTP Define the FTP settings. See “Configure an FTP server to
store snapshots” on page 82 for more information.
SNMP Define the SNMP settings. See “SNMP settings” on page 82
for more information.
UPnP Enable this function so that the recorder can automatically
configure its own port forwarding. See “UPnP settings” on
page 83 for more information.
More Settings Define a multicast IP as well as the server, HTTP, and RTSP
ports. See page 76.
Net Statistics Check the bandwidth being used by remote live view and
playback. See “Network statistics” on page 85 for more
information.
Recording Recording Schedule Define the recording schedules. See “Recording schedule”
on page 86 for more information.
Manual Recording Define which cameras can manually record. See “Manual
recording” on page 89 for more information.
Alarm & Event
Setup
Alarm Input Define the alarm input parameters for when an external
alarm is triggered. See “Set up alarm inputs” on page 90 for
more information.
Alarm Output Define the response when an external alarm is triggered.
See “Manual trigger” on page 92 for more information.
Manual Trigger Define the manually trigger outputs of the recorder. See
“Manual trigger” on page 92 for further information.
Buzzer Settings Define the warning buzzer time. See “Buzzer” on page 92 for
more information.
Notifications Define the notification parameters when irregular events
occur, such as a HDD is full. See “Alarm notification types”
on page 93 for more information.
Video Loss Define the video loss detection settings. See “Detect video
loss” on page 94 for more information.
Alarm Host Setup Define the remote alarm host. See “Remote alarm host
setup” on page 95 for more information.
To Next Page
Loading...
Need help?
General
