Intermec EasyCoder 201 II - Easycoder 201 Iie

9
Intermec EasyCoder 201 II – Technical Manual
Feature EasyCoder 201 IIE
Print Technique Direct Thermal
Quick-Mount Printhead 6 or 8 dots/mm (153.9 or 203.2 dpi)
Print Width, Standard (6 or 8 dots/mm resp.) Max. 85.3 mm (3.36") or 80.0 mm (3.15")
Print Width, Big Roll
3
(6 or 8 dots/mm resp.) Max. 80.2 mm (3.16") or 78.0 mm (3.07")
Media Width, Standard Max. 89.0 mm (3.50")
Media Width, Big Roll
3
Max. 80.2 mm (3.16")
Print Length (6 or 8 dots/mm resp.) Max. 1650 mm (65") or 1250 mm (49")
Print Speed Max. 75–125 mm/sec. (3–5"/sec.)
Fonts, expandible 4 times
5
Min. 1 Bitmapped; Standard: 10 Bitmapped
Print Directions for Text, Images, Lines, and Boxes 4
Bar Code Generators Depends on firmware version
5
Internal Paper Roll Diameter, Standard Max. 125 mm (4.9")
Internal Paper Roll Diameter, Big Roll
3
Max. 185 mm (7.25")
Keyboard, built-in 21 keys plus Print button
Display 2 lines x 16 characters LCD
Dimensions (W x D x H), Standard 225 x 418 x 159 mm (8.86 x 16.46 x 6.26")
Dimensions (W x D x H), Big Roll
3
225 x 418 x 205 mm (8.86 x 16.46 x 8.07")
Dimensions (W x D x H), Bag Tag w. ext. guides
3
239 x 418 x 159 mm (9.39 x 16.46 x 6.26")
Weight (excl. paper, ribbon and options) 9.0 kgs (20 lbs)
Ambient Operating Temperature + 5˚C – +40˚C (+41˚F – +104˚F)
Humidity 20–80% non-condensing
Sound Emission Level < 55 dB (A)
Microprocessor 32 bit
Firmware Intermec Fingerprint 6.13 incl. Intermec Direct Protocol
Startup program Intermec Shell 4.01 Enhanced
On-Board RAM Memory, standard 256 kbytes
Label End Sensor Standard
Mains Voltage (switch change-over) 115/230 VAC (+10%/-15%), 2.6/1.3 A 60/50 Hz
Max. Power Consumption 300 W
Communication Interface, standard RS 232C/20 mA Current Loop
1
1 x Centronics Interface
1,4
Optional
1 x RS 232C + 1 x RS 232C/20 mA CL Interface
1,4
Optional
1 x RS 232C + 1 x RS 422/RS 485 Interface
1,4
Optional
1 x RS 232C + 1 x 4 IN/OUT ports Interface
1,4
Optional
Label Taken Sensor (LTS)
1
Optional
Real Time Clock (RTC)
1
Optional
Memory Card Adapter
1
Optional
RS 232C Cable
2
Optional
Centronics Cable
2
Optional
External RS 232C Alphanumeric Keyboard
2
Optional
Peel-Off /Internal Rewind Device
3
Optional
Black Mark Sensor
1, 6
Optional
Cutter Unit
1
Optional
Intermec Toolbox, PC Windows configuration support
2
Optional
Intermec LabelShop, WYSIWYG Label Software for Windows
2
Optional
Intermec Windows Drivers
2
(excl. cable) Optional
1
/. Available as factory installed option or field-installable kit.
4
/. Only one interface board can be fitted.
2
/. Field-installable option only.
5
/. See Intermec Fingerprint Reference Manual.
3
/. Factory-installed option only. Must be requested at time of order.
6
/. Only on non-dispensing models.
MODELS, cont'd. EasyCoder 201 IIE