Intermec EasyCoder 201 II - Technical Manual

40
Intermec EasyCoder 201 II – Technical Manual
SETTING UP EASYCODER 201 IIE & 201 IISA, cont'd.
Detection, cont'd.
Feed adjustment:
STARTADJ:
[0]:
The present value of the start adjustment is displayed within
brackets. Accept the value by pressing < Enter >, or type a new
value and press < Enter >.
STOPADJ:
[0]:
The present value of the stop adjustment is displayed within
brackets. Accept the value by pressing < Enter >, or type a new
value and press < Enter >.
Action EasyCoder 201 IIE EasyCoder 201 IISA
New value Numeric keys Numeric keys
Negative value < . ><- >
Acknowledge setup and proceed < Enter >< Enter >